304 Seamless Stainless Steel Shaped Exhaust Tube

Stainless Steel Pipe

Stainless Steel Shaped Tube

304 Seamless Stainless Steel Shaped Exhaust Tube

   Stainless steel shaped pipes are widely used in various structural parts, tools and mechanical parts. Compared with round pipes, stainless steel special-shaped pipes have larger moment of inertia and section modulus, and have greater bending and torsional resistance, which can greatly reduce the structural weight and save steel.
  1. In terms of machine manufacturing, special-shaped Stainless Steel Tubes are used to manufacture hollow drive shafts, pistons, various tools, fasteners, watch cases and various mechanical parts of motor vehicles.
  2. In terms of construction, the use of stainless steel special-shaped pipes to make doors and windows is not only lightweight and durable, but also cheap.
  3. A large number of thin-walled stainless steel special-shaped pipes are used in the structural parts of bicycles, motorcycles, tractors, automobiles and large passenger cars. This type of pipe has a large section coefficient, strong bending and torsion resistance, and a smooth surface, so the weight is relatively high.
  4. Stainless steel special-shaped pipes are widely used in instruments, telecommunication equipment and medical equipment to make brackets, guide rails, and the frames of boxes and cabinets, so that they have the characteristics of light weight, beautiful appearance, novel style and convenient handling and portability.
  5. On various thermal equipment, mechanical equipment or wireless receivers and transmitters, special-shaped pipes with blade box ribs are widely used to manufacture radiators or heat exchangers. This steel pipe has good heat dissipation effect and can effectively reduce equipment. Or the temperature of the component, so that it can maintain normal operation for a long time.

• Specification

       12.7*12.7mm-400*400mm, wall thickness 0.6mm-20mm, Stainless Steel Round Tube is generally 6*1-630*28, the specifications are 4 points, 6 points, 1 inch, 1.2 inches, 1.5 inches, 2 inches, 2.5 inches inch, 3 inches, 4 inches, 5 inches, 6 inches, 8 inches, 102, 108, 127, 133, 139, 159, 168, 177, 194, 219, 273, 325, 377, 426, 530, 630, etc. Stainless steel special-shaped pipes generally refer to square and rectangular steel pipes, triangular steel pipes, hexagonal steel pipes, stainless steel pattern pipes, U-shaped pipes, D-shaped pipes, water bends, etc.

• Advantages

    1. Corrosion resistance
The surface of the stainless steel special-shaped pipe has relatively good corrosion resistance after coloring processing. There are two main reasons. One is that the composition of the color film on the pipe surface is the same as its passivation film, and it is thicker, so the corrosion resistance of the pipe should be higher. Much stronger than ordinary stainless steel. The second is that after the colored solid film treatment, a large amount of trivalent chromium will be deposited in the pores of the colored film, so that the ratio of chromium to iron in the colored film is much higher than that in the base metal, so the corrosion resistance of colored stainless steel is greatly enhanced. in non-pigmented stainless steel.
   2. Heat resistance
The color stainless steel special-shaped tube has strong heat resistance. It is immersed in boiling water for 28 days, exposed to dry conditions at 150 °C for 5 weeks, exposed to dry conditions at 200 °C for 3 weeks, and exposed to 200 °C for a long time. °C. These tests did not change the surface color, and other properties such as the adhesion of the surface film did not change significantly.
   3. Wear resistance and scratch resistance
The hardening treatment of stainless steel special-shaped pipe after coloring treatment will enhance the abrasion resistance and scratch resistance of the colored film on the surface of the pipe. The surface coloring film can withstand more than 200 frictions of a rubber with a load of 500g (without wearing through), can withstand the scribing of a steel needle with a load of 50-120g (without scratching), and can withstand 888 rpm friction for 12 minutes.

  We can offer Stainless Steel Pipe products, including Stainless Steel Capillary Pipe,  Stainless Steel Precision Pipe,  Stainless Steel Seamless Pipe ,  Stainless Steel Sanitary Pipe ,  Thick Wall Stainless Steel Pipe, Stainless Steel Bright Tube ,  Stainless Steel Needle Tube , Stainless Steel Fine Tube , Stainless Steel Coil , Welded Stainless Steel Pipe ,  Stainless Steel Industrial Pipe, Stainless Steel Round Tube,  Medical Stainless Steel Tube ,  Stainless Steel Thin Wall Tube ,  Stainless Steel Shaped Tube, Stainless Steel Elbow , Stainless Steel Snake Bone Tube, Stainless Steel Decorative Tube, Stainless Steel Electronic Cigarette Tube, Stainless Steel Tube Processing, Copper Pipe ,  Titanium Alloy Tube , Aluminum Tube , and so on.

  Stainless Steel Shaped Tube from HaoFa helps distributors of Stainless Steel Products to gain the market, with eco-friendly and steady quality, customized service, and favorable prices.

   Looking for an ideal AISI SUS 304 SS Shaped Tube Manufacturer & supplier? We have a wide selection at good prices to help you get creative. SUS 304 Polished SS Shaped Tube are quality guaranteed. We are a China Origin Factory of Non-pressurized SUS 304 Shaped Tube. If you have any questions, please feel free to contact us.